
To do Basic Configuration for router :
1) To configure a router you must be in privileged mode : Router >ena
2) To be able to configure at all, you must be in the configuration terminal: Router#config t
3) Then you place the Hostname of the router : Router(config)#Hostname R1
4) Then you enable a password for security: R1(config)# enable password Cisco
5) After that, you add more security: R1(config)# enable secret Class
6) Then you must place a Banner: R1(config)# Banner motd * This is private property, get out. For assitance contact Brianna Price 347-876-1555*
7) Save current confiration: R1(config)# no shutdown
8) Leave configuration mode to save entire work: R1 ctrl-z
9) Configure interface: R1(config)# int s 0/0/0
10) R1(config)# ip address 10.10.10.253 255.255.255.252
11) R1(config)# no shutdown
12) R1(config) ctrl-z
13) R1# copy running-config startup-config
14) R1# config t
15) R1(config)# int gi0/0
16) R1(config)#ip address 172.16.1.1 255.255.255.224
17) R1(config)# no shutdown
18) R1(config)# ctrl-z
19) R1# copy running-config startup-config
You have configured Router 1's Serial and Giga Ethernet Interfaces/Ports !
No comments:
Post a Comment