Friday, May 3, 2013

RIPv1 Configuration


Today we Configured a topology but we installed RIPv1 into the configuration. RIPv1 uses Classful updates and broadcasts the networks that are connected to that router. This first thing we did was build the topology. We needed a network that had 3 1941 routers, 1 2911 router(with Loopback), and switches connected to the routers. After we installed the WIC2T's cards and connected the routers and switches correctly, we allocated the ip addresses of the interfaces and networks. We basically configured each router carefully, then made sure they were all connected. Finally we installed RIPv1 onto each Router:

1) Enter Configuration mode: Router#config
2) Enter RIP configuration: Router(config)#router rip
3) Now while you are in RIP configuration, you must add the networks that that router knows.
       Router(config-router)#network 1.1.1.0

I continued to configure the Routers using RIP .



Monday, April 29, 2013

Final School Year Goal



For the Spring Semester Marking Period 2, I received a 95 from Mrs.Ramirez. My goal was to reach a 90 and maintain it. I feel accomplished that not only did I reach my goal, I surpassed it. I don't believe that this is my full potential. If I push myself a little further, I bet I can reach 98 or somewhere close to an 100. But, I am very pleased with my grade for Last marking period. My new goal is to reach my full potential and strive for that 98 or higher. I also don't want to go below the current grade of 95. Thank you Mrs.Ramirez .

Friday, April 26, 2013

Project: Static Route Configuration



For this project on Static Configuration we had to build a topology that included 4 2911 Routers, and 4 2960 Switches. The routers in the topology had to WIC 2T cards in order to be connected to each other with DCE and DTE Serial Wires. The switches were to be connected with straight through wires to the GigaEthernet ports of the Routers. The PCs were connected to the Fast Ethernet Ports of the Switches. The problem I had was that When connecting the topology I had forgotten to turn off the router to install the WIC 2T cards. At one point I also forgot to install the WIC 2T cards. When placing the ip addresses on the network You have to make sure it goes in the correct port interface. After you have completed the Basic Configuration of all routers, You Statically Configure all of the networks. Below is the procedure I did to Statically configure all the routers. When Finished ping all routes to ensure that the topology is working.
Static Configuration :

1.Go to router 1,  and configure it :
            - Router>ena
            -Router#config
            - Router(config)# hostname Border
            - Border(config)# ena password Cisco
            - Border(config) # ena secret Class
            -Border(config)#banner motd * This mine Get out, for assistance contact Brianna Price 347-568-5698*
             -Border(config)# ctrlz
             -Border# copy running-config startup-config
             - Border# config
             - Border(config)# int s0/3/0
             -Border(config-if)# ip address 1.1.1.2 255.255.255.252
              -Border(config-if)# ctrlz
              -Border#config
               - Border(config)#int loopback0
              -Border(config-if)# ip address 198.155.202.1 255.255.255.255
               -Border(config-if)# ctrlz
               -Border#config
               -Border(config)# ip route 1.1.1.4 255.255.255.252 s0/3/0
               -Border(config)#ip route 1.1.1.8 255.255.255.252 s0/3/0
               -Border(config)# ip route 192.168.10.0 255.255.255.224 s0/3/0
               -Border(config)#ip route 192.168.20.0 255.255.255.224 s0/3/0
                -Border(config)#ip route 192.168.30.0 255.255.255.224  s0/3/0
               -Border(config)# ip route 192.168.40.0 255.255.255.224 s0/3/0
               -Border(config)# ctrlz
               -Border# copy running-config startup-config
4. Go to router 2 and configure it:
              -Router>ena
              -Router#config
              -Router(config)# hostname NewYork
              -NewYork(config)# ena password Cisco
              -NewYork(config)# ena secret Class
              -NewYork(config)#banner motd *This is mine get out, For assistance contact Brianna Price 347-568-5698*
               - NewYork(config)#ctrlz
                -NewYork#copy running-config startup-config
               -NewYork#config
               -NewYork(config)# int s0/2/0
               -NewYork(config-if)# ip address 1.1.1.1 255.255.255.252
               -NewYork(config-if)# ctrlz
               -NewYork#config
               -NewYork(config)# int s 0/3/0
               -NewYork(config-if)# ip address 1.1.1.10 255.255.255.255.252
              -NewYork(config-if)# ctrlz
               -NewYork(config)# int s0/3/1
                -NewYork(config-if)# ip address 1.1.1.6 255.255.255.252
                 -NewYork(config-if)#ctrlz
             -New York#config
             -NewYork(config)# ip route 192.168.10.0 255.255.255.0 s/0/3/1
            -NewYork(config)# no shutdown
           --NewYork(config)# ctrlz
           -NewYork(config)# ip route 192.168.20.0 255.255.255.0 s/0/3/1
           -NewYork(config)# ctrlz
           -NewYork(config)# ip route 192.168.168.40.0 255.255.255.0 s0/3/1
          -NewYork(config)# ctrlz
          -NewYork(config)# ip route 192.168.30.0 255.255.255.0 s0/3/1
          - New York(config)# ctrlz
         --NewYork#copy running-config startup-config
5. Go to router 3 and configure it:
         -Router>ena
         -Router#config
        -Router(config)# hostname Vegas
       -Vegas(config)# ena password Cisco
       -Vegas(config)# ena secret Class
       -Vegas(config)#banner motd *This is mine get out, For assistance please contact Brianna Price 347-568-5698*
        -Vegas(config)#ctrlz
       -Vegas#copy running-config startup-config
       -Vegas#config
       -Vegas(config)# int s0/2/0
      -Vegas(config-if)# ip address 1.1.1.9 255.255.255.252
      -Vegas(config-if)# ctrlz
     -Vegas#config
     -Vegas(config)# int g0/0
     -Vegas(config-if)# ip address 192.168.40.254 255.255.255.224
     -Vegas(config-if)# ctrlz
     -Vegas#config
    -Vegas(config)# int g0/1
    -Vegas(config)# ip address 192.168.30.254 255.255.255.224
    -Vegas(config-if)# ctrlz
    -Vegas#config
    -Vegas(config)#ip route 1.1.1.0 255.255.255.252 s0/2/0
     -Vegas(config)# ctrlz
 -Vegas(config)#ip route 1.1.1.4 255.255.255.252 s0/2/0
  -Vegas(config)#ctrlz
 -Vegas(config)#ip route 192.168.10.0 255.255.255.0 s0/2/0
  Vegas(config)# ctrlz
  -Vegas(config)#ip route 192.168.20.0 255.255.255.0 s0/2/0
   -Vegas(config)#ctrl z
   Vegas#copy running-config startup-config
6. Go to router 4 and configure it:
   -Router>ena
   -Router#config
    -Router(config)# hostname Boston
   -Boston(config)#ena password Cisco
Boston(config)# ena secret Class
Boston(config)#banner motd *this is mine get out For assistance contact Brianna Price 347-568-5698*
Boston(config)#ctrlz
Boston#copy running-config startup-config
Boston# config
Boston(config)#int s0/3/0
Boston(config-if)# ip address 1.1.1.5 255.255.255.252
Boston(config-if)#no shutdown
Boston#config
Boston(config)# int g0/0
Boston(config-if)# ip address 192.168.20.254 255.255.255.0
Boston(config-if)#ctrlz
Boston#config
 Boston(config)# int g0/1
Boston(config-if)# ip address 192.168.10.254 255.255.255.0
Boston(config-if)#ctrlz
SInce you have Labeled and assigned ip addresses to the interface of the Last Router, You have to make it so that Boston knows about the other Subnetworks on the Entire Network. SO you must Statically Configure Boston.

Once this is finished you will have Statically configured the entire Network :)


 

Tuesday, April 23, 2013

Basic Router Configuration
























To do Basic Configuration for router :

1)  To configure a router you must be in privileged mode : Router >ena
2)  To be able to configure at all, you must be in the configuration terminal: Router#config t
3)  Then you place the Hostname of the router : Router(config)#Hostname R1
4)  Then you enable a password for security: R1(config)# enable password Cisco
5)  After that, you add more security: R1(config)# enable secret Class
6)  Then you must place a Banner: R1(config)# Banner motd * This is private property, get out. For assitance contact Brianna Price 347-876-1555*
7)   Save current confiration: R1(config)# no shutdown
8)   Leave configuration mode to save entire work: R1 ctrl-z
9)   Configure interface: R1(config)# int s 0/0/0
10) R1(config)# ip address 10.10.10.253 255.255.255.252
11) R1(config)# no shutdown
12) R1(config) ctrl-z
13) R1# copy running-config startup-config
14) R1# config t
15) R1(config)# int gi0/0
16) R1(config)#ip address 172.16.1.1 255.255.255.224
17) R1(config)# no shutdown
18) R1(config)# ctrl-z
19) R1# copy running-config startup-config
You have configured Router 1's Serial and Giga Ethernet Interfaces/Ports !

Friday, May 27, 2011

Advantages of Saving Powerpoint in 4 Types:

                    In powerpoint, you can save your presentation in four different formats.  These different formats allow you to open your presentation in different styles.  It also allows you to view the presentation on paper. In Powerpoint you can add transitions and animations.  As well as sounds and pictures. These four formats can be very useful.
                  

Monday, April 25, 2011

Worksheet

A sheet of paper on which preliminary notes or computations are set down.
http://www.thefreedictionary.com/worksheet

Workbook

An Excel Workbook is a file used by a Microsoft Excel spreadsheet application.
http://www.ehow.com/facts_4968676_excel-workbook-definition.html

Value

Estimate the monetary worth of (something)
http://www.google.com/search?um=1&hl=en&biw=1436&bih=727&q=theme%20definition&ie=UTF-8&sa=N&tab=iw#sclient=psy&hl=en&biw=1419&bih=727&tbs=dfn:1&source=hp&q=Value&aq=f&aqi=g10&aql=&oq=&pbx=1&bav=on.2,or.r_gc.r_pw.&fp=21697d3617d55586

Theme

The subject of a talk, a piece of writing, a person's thoughts, or an exhibition; a topic
http://www.google.com/search?um=1&hl=en&biw=1436&bih=727&q=theme%20definition&ie=UTF-8&sa=N&tab=iw#hl=en&sa=N&q=theme&tbs=dfn:1&tbo=u&ei=xuO1TeOEC8Lv0gGTrK2wBQ&ved=0CCEQkQ4&biw=1419&bih=727&bav=on.2,or.r_gc.r_pw.&fp=4b4c77cdf5f52ee

Table style

The format of a table in excel.

Statistical Functions

In the spreadsheet window statistical functions can be entered that perform a calculation on one or two variables or ranges of cells containing numeric values.
http://www.medcalc.org/manual/statistical_functions.php

Spreadsheet

 A computer program used chiefly for accounting, in which figures are arranged in the rows and columns of a grid.
http://www.google.com/webhp?hl=en#hl=en&site=webhp&q=spreadsheet&tbs=dfn:1&tbo=u&sa=X&ei=b-K1Tb6RH6HE0QHimpT7CA&sqi=2&ved=0CBkQkQ4&bav=on.2,or.r_gc.r_pw.&fp=4b4c77cdf5f52ee

Split

Divide into two or more groups
http://www.google.com/search?hl=en&q=row%20heading&bav=on.2,or.r_gc.r_pw.&wrapid=tlif130376253619010&um=1&biw=1419&bih=727&ie=UTF-8&sa=N&tab=iw#sclient=psy&hl=en&biw=1419&bih=727&tbs=dfn:1&source=hp&q=split+&aq=f&aqi=g10&aql=&oq=&pbx=1&bav=on.2,or.r_gc.r_pw.&fp=21697d3617d55586

Smart Art

  • SmartArt - Microsoft Office 2007 (officially called 2007 Microsoft Office System) is the most recent Windows version of the Microsoft Office System, Microsoft's productivity suite. ...

Sheet Tab

  • In spreadsheet applications, this would refer to a tab at the bottom of a work sheet that acts as a means to identify or access different sheets within a workbook.

Row Heading

A number on the left side of the grid that identifies each row.
https://mcleodwest.wikispaces.com/SpreadsheetVocabulary

Row

A horizontal line of entries in a table.
http://www.google.com/search?hl=en&sugexp=ldymls&xhr=t&q=definition+respect&cp=13&pf=p&sclient=psy&site=&source=hp&aq=0&aqi=&aql=&oq=definition:+R&pbx=1&cad=cbv#hl=en&q=row&tbs=dfn:1&tbo=u&sa=X&ei=bda1TcOtHoiL0QG69PizCQ&ved=0CBYQkQ4&bav=on.2,or.r_gc.r_pw.&fp=4b4c77cdf5f52ee

Sunday, April 24, 2011